How to reduce the failure of double chamber vacuum packing machine?

Vacuum packaging machine is a kind of packaging equipment commonly used in the food industry, and the two-chamber vacuum packaging machine is also a vacuum packaging machine that is currently used more. In the process of using the equipment, we often encounter some two-chamber vacuum packaging machine failures. So how do we reduce the probability of failure of the two-chamber vacuum packaging machine? Let's take a look.

1. Avoid motor reversal

The double-chamber vacuum packing machine has two studios that can be used in rotation. When one studio is vacuuming, the other vacuum chamber can put the products. After the product is placed, the vacuum process is completed, so the waiting time is omitted. The working efficiency is 1.5 times that of the single-chamber vacuum packing machine. Its operation is relatively simple, and it can be plug-and-play. We had the double chamber vacuum packaging machines, needs to be an important link, wire processing, because of the double chamber vacuum packaging machines are generally three-phase electric, three-phase electric wiring is seen by the situation, the line when we connected, plug in the power cord and open the power switch, three motor reversal if happen, only need to arbitrarily change the wires can avoid such problems.

2. Check the vacuum pump regularly

Double chamber vacuum packaging machine fault is a large part of the reason why because we caused by improper maintenance of the equipment, the vacuum pump is not exceptional also, so we need to get into the habit of regular check vacuum pump, when we go to the rear double chamber vacuum packaging machine, through the vacuum pump oil oil, seen in location, see if the vacuum pump oil has reached the oil window, if lower than the oil window, should be added and. If the oil is found to be black or cloudy, the vacuum pump oil should be replaced immediately.

Three, do daily cleaning

When we finish using the two-chamber vacuum packing machine, we should timely clean up the waste dropped on the table. If we cannot do it in time, for a long time, it will cause corrosion to the equipment. When we finish cleaning the equipment every day, we should check whether some parts of the two-chamber vacuum packing machine that are easy to wear need to be added with lubricating oil.

To sum up, can see come out, double chamber vacuum packaging machine fault mostly because of improper use or caused by improper maintenance, double chamber vacuum packaging machines while the operation is simple, but there is no use double chamber vacuum packaging machines for some experience of the couple, can conduct a training, only the correct use of double chamber vacuum packaging machine, to qualified mount guard, preventive maintenance, as long as can do is to prolonging the service life of the double chamber vacuum packaging machines.