What factors affect the vacuum packing machine in the process of use?

What factors affect the vacuum packing machine in the process of use? The use of vacuum packing machine will be affected by other factors. Colloid mill is a kind of grinding colloid or similar colloid material superfine grinding and homogenizing machine. It by motor through the belt transmission belt regulated tooth the matching (or called rotor) and fixed tooth (or called stator) do relatively high-speed rotation, the weight of the processed material by itself or an external pressure (can) generated by the pump pressure produces the spiral downward impact, through constant, transfer between tooth clearance, clearance can be adjusted by powerful shear force, friction, high frequency vibration, such as physical function, make the material being dispersed and crushing, to achieve the effect of super fine crushing material. According to the structure and installation of different colloid mill vertical and horizontal two. Vacuum packaging machine price is different.

What factors affect the vacuum packing machine in the process of use? Fixing and mill is a pair of moving parts, material is stainless steel, the surface hardness is generally cannot under HRC35 ~ 70, move a cone-shaped mill, installed on the working shaft, the outer surface of the conical longitudinal tooth, points from top to bottom, the fine three ring, fixed abrasive disk fixed on the shell, the taper and the relative motion a millstone, assembled into a whole, dynamic mill taper tooth surface contact area, the assembly after the alignment error is less than 0.05 mm colloid mill work, the material through the mill and a millstone, ring space between the high-speed rotating due to move a millstone, attached to material on the surface of the rotating speed, and attached to be a millstone The material speed is zero, during which a sharp speed gradient is generated, so that the material is crushed, dispersed, ground and homogenized under the action of complex forces such as strong shear, friction, impact and high-frequency vibration. Generally, colloid mill is equipped with a tee tube in the discharge tube, which can be operated circularly until the required fineness. In the process of using, the food packaging machine will also be affected by some external environment.

What factors affect the vacuum packing machine in the process of use? Colloid mill according to the nature of the material, the need to refine the degree of discharge and other factors to adjust. Adjustment, can adjust the ring driven by rotating the regulating handle fixed abrasive disc axial displacement and make the clearance change, if you need big size than, adjust the mill to move down, generally the adjusting range is 0.005 ~ 1.500 mm, in order to avoid indefinitely adjustment caused by collision, moving a millstone, at the bottom of the adjusting ring is equipped with the limit screw, when the adjusting ring to screw it couldn't be adjusted. Vertical colloid mill spindle speed is generally 2800~2950r/min, high up to 12000r/min. Grinding fineness is generally 5~10m, fine up to 1pam.

What factors affect the vacuum packing machine in the process of use? The working spindle of horizontal colloid mill is parallel to the ground plane. Its working principle is similar to that of vertical colloid mill. The working face of moving and fixed grinding disc adopts plane concentric v-shaped groove with big teeth interlocked. The gap between the two plates is adjusted between 0.05 and 0.15mm. The rotating speed of moving grinding disc is 3000~15000r/min, and the small grinding fineness can be less than 2m.

What factors affect the vacuum packing machine in the process of use? The colloid mill has simple structure, convenient operation and easy maintenance and cleaning. The horizontal colloid mill has good performance and is suitable for thin materials with low viscosity. Vertical colloid mill with strong grinding and crushing ability is suitable for materials with high viscosity (viscosity greater than 1Pa·s). Due to the large amount of air carried by the material into the grinding disc, it is easy to oxidize the material. In the continuous production line, it is advisable to use closed pipeline to feed the material and add degassing process when necessary.