What are the commonly used models of vacuum fitting machine?

Vacuum packing mentioned, we may not be strange, vacuum packaging of food can be seen everywhere, like the bean curd, we usually eat marinated egg, chicken feet, reasonable, ham, etc. These foods cannot leave the vacuum packing, and the emergence of a vacuum stick put oneself in machine, breaking the traditional vacuum packaging using vacuum bags to packaging food packaging, But using a special material stick put oneself in the membrane for product packaging, this film because of its permeability is strong, packing the product can hardly see the existence of the membrane, so food after vacuum stick put oneself in machine packaging, stereo sense is stronger, not only promoted higher and make food a wrapper class, the current vacuum stick put oneself in machine and a variety of different types of segment, So what are the commonly used models of vacuum fitting machine? Let's take a look.

First, vacuum fitting machine commonly used models of the cover type

The vacuum cover stick put oneself is a type of early, this model is only a vacuum chamber, vacuum chamber has a studio cover above, after we put the product to the work station, directly to the cover down products began to enter the vacuum process, after the end of the working process, cover automatically bounce, a work cycle is over, At present, this type of machine has a disadvantage that the whole film of the packaged product is attached to the table, so the film needs to be cut manually.

Two, vacuum fitting machine commonly used models of push-pull type

The push-pull type vacuum stick put oneself in machine commonly used machine in the process of operation is similar to the fresh mounted cassette gas switch installed lock, product box mold, press the start switch, operating platform automatically into the vacuum chamber for vacuum press, vacuum packaging, after the completion of automatic product will launch, here, the product in the vacuum room besides vacuum action, The packaging film of products can be automatically cut, eliminating the need for manual cutting of the cap-closing vacuum fitting machine, thus improving the production efficiency. At present, this push-pull type is divided into single in and single out vacuum fitting machine and double in and double out vacuum fitting machine according to work capacity. This is also easy to understand. Single in and single out is a one-way push and pull on one side, while double in and double out is a push and pull on both sides.

Three, vacuum fitting machine commonly used models of continuous fitting type

It is vacuum stick put oneself in a machine commonly used models of high capacity, it adopts continuous work, a high degree of automation, appearance similar to a continuous stretch film vacuum packaging machine, artificial will need packaging products put in the box, and then in sequence to the pendulum material area, and then automatically by putting in the box into the empty space to sealing the products, After pumping straight air sealing is completed, the product is divided, and then the product is output by the conveyor belt by the push rod in turn. The whole packaging process is equivalent to a production line, which is more suitable for large-scale food processing enterprises with mass production.

Through the above introduction, we can see that vacuum fitting common models are divided according to work capacity and packaging requirements. In the choice of equipment, we can also choose different types from these aspects.