What are the matters needing attention in the use of air shower in dust-free workshop?
Dust-free workshop for food processing requirement is more strict, in order to prevent pollution caused by the operators into the workshop situation, will be in dust-free workshop to set up the air shower to remove dust of operating personnel, this need through a series of correct operation method, then what are the precautions for dust-free workshop air shower use? Let's have a look at it.
1. Matters needing attention before entering
One point that needs to be paid attention to is that personnel need to wear clean clothes, hats, masks and gloves before entering the air shower.
1. Dress standard for dust-free clothes.
The clothes and hair should be arranged before wearing the dust-free clothes and hats to avoid discomfort after wearing the dust-free clothes. When wearing a dust-free hat, hair should be completely covered inside the hat and not exposed. The dust-free clothes need to put all the sticky QQ on. Do not unbutton or even take off your hat when entering the clean room!
2. Wearing standard of masks.
When wearing a mask, the mask should be worn on the nose. The principle is to cover the mouth and nostrils to avoid contamination during breathing. Do not pick in clean room.
3, gloves wearing standard.
When wearing gloves, avoid touching the palm and fingertips of the tentacle cover with a bare hand (to prevent sodium ion contamination). After wearing gloves, the wrist of the gloves should be placed inside the sleeve to avoid contamination.
Two. Matters needing attention after entry
The key points for attention in the use of dust-free workshop air shower room is in this link, after the operator enters the air shower room, the air shower door closes automatically immediately, blowing for about 15 seconds before entering the dust-free workshop. People entering the clean room should take off their watches, coats, mobile phones and accessories in the dressing room outside. Into the air shower, blowing dust removal, tuyere is to the person standing position, air shower in its domestic demand people rotate 360 degrees, and slapping body clothing, here need to remind a bit: when in and out, should get into the habit of conveniently close the door, lest cause on another door does not open, then people can not enter the air shower phenomenon occurred.
Three, maintenance matters needing attention
One thing that needs to be emphasized in the use of air shower in dust-free workshop is the later maintenance of equipment. When we are using the air shower, if there is a fault in the air shower, we should quickly press the emergency stop switch, turn off the power, and then call the air shower manufacturer to arrange after-sales personnel for inspection. In order to avoid the failure of the air shower caused by improper operation, it is necessary to carry out certain training for the relevant operators, and the training can be qualified before working. In addition, the air shower should be regularly checked, such as air shower filter is recommended to be replaced every six months, high filter is recommended to be replaced once a year. Keep the air shower indoor and outdoor clean. Air shower as far as possible do not put in the strong acid alkali place to avoid damage to the air shower box body. Enter the air shower from the door, close the door, the shower immediately start; After the shower is finished, the door has been locked, can only open to go out, from out of the door, at this time can not force open the door, otherwise it will damage the double door interlocking system.
Read the above introduction, I believe you have a more in-depth understanding of the use of dust-free workshop air shower precautions, and in the use of the air shower, need to do special care operation, daily regular maintenance, can extend its service life!