How much do you know about the operation failure and solution of the automatic mask packaging machin
Operation failure and solution of mask automatic packaging machine; Due to the use of automatic packing machine is more complex, high degree of automation, is controlled by PLC, touch screen operation of equipment, so often as connection error or improper operation caused some phenomenon, the emergence of these barrier now often is not caused by vacuum packaging machine itself put a barrier, but caused by error. For these obstacles, it is necessary to reset the working parameters of the equipment and adjust the working parameters, which can be easily solved. Therefore, it is not necessary to wait for the technicians of the manufacturer to repair, so as to cause unnecessary losses. If the personnel who use the automatic vacuum packing machine know which operation errors caused these failures, they can often be quickly removed.
Operation failure and solution of mask automatic packaging machine; Automatic vacuum packaging machine is often divided into several types of equipment, such as rolling vacuum packaging machine, stretch film packaging machine, bag - feeding vacuum packaging machine. These equipment in the vacuum packaging machine, belong to a high degree of automation, operation data can be displayed on the touch screen, PLC control operation.
Operation failure and solution of mask automatic packaging machine; There are two common faults about the equipment not running in the use of the automatic vacuum packaging machine:
Operation failure and solution of mask automatic packaging machine; The power supply is disconnected
Causes of operation failure of automatic mask packaging machine:
Operation failure and solution of mask automatic packaging machine; 1. The wire plug is not plugged into the power socket
2. The power switch is in the wrong position.
Operation failure and solution of mask automatic packaging machine
4. The timer switch is in the position of 0N ", so that the packaging mechanical and electrical source is in the shutdown state under the control of the timing switch
Solution to operation failure of mask automatic packaging machine:
1. Check the voltage on the power socket and plug the VCR
2. Turn on the switch of video electromechanical source, put it in the position of "0N" and make it on.
3. Check the power cord for reliable connection.
4, put the timing switch "OF" position.
Operation failure and solution of mask automatic packaging machine; Two, after the power, the vacuum packaging machine's operation does not go to the terminal at a certain point to stop the operation
Causes of operation failure of automatic mask packaging machine:
1. The memory switch works. At present, all automatic vacuum packaging machines have power failure memory device. With this device, if the vacuum packaging machine is shut down due to power failure, the vacuum packaging machine will automatically stop working when it reaches a certain position.
2, the vacuum packaging machine service life is too long, some electrical aging, such as the rolling vacuum packaging machine, stretch film packaging machine and bag packaging machine position detection error, so that the machine automatically stop. As we all know, mechanical equipment is the same with the car we drive, are limited in service life, packaging machinery use time is too long, there will be some operating problems.
Solution to operation failure of mask automatic packaging machine ii:
1. Put the memory switch on the "OFF" position or cancel the "M memory" state to make the packaging equipment remove the memory function.
2, if it is due to the use of too long time caused by electrical aging, you can contact the manufacturer to replace the electrical equipment.
The above is about the operation failure of the automatic mask packaging machine and the solution. If you want to know more about the automatic mask packaging machine, the next chapter will continue to share.