Take you to know more about continuous rolling vacuum automatic packaging machine

Continuous rolling vacuum automatic packing machine the sealing line of vacuum packing machine can reach 1000mm, which can meet the requirements of high output.This machine has the remarkable characteristics of high precision, steady lifting and accurate rolling belt positioning.Equipment operators do not have to manually adjust the belt position, more time and labor saving.Continuous rolling vacuum automatic packaging machine hardware configuration is extremely high.The contactor is made of omron from Japan, and the switch appliance is made of schneider from France, with reliable quality and stable performance.The machine can be tilted at four angles to meet various packaging requirements.Rolling continuous packaging, improve work efficiency.

Continuous rolling vacuum packing machine has exquisite workmanship, exquisite workmanship, the operating system is completely sealed, the whole machine can be used to produce pickles or packing with liquid.

The following can be specific understanding of this continuous rolling vacuum automatic packaging machine!

First, how to use the machine:

A turn on the power switch (the power indicator is on).At this time, due to the memory function of the system control program, if there is an unfinished program before the last shutdown, it may trigger the upward movement of the upper studio (ZUI should make the equipment idle for 3-6 times before production).

B. On the operating station, adjust the distance between the material baffle and the sealing line to the appropriate distance, and put the packaging bags (the mouth of the bags should be clean and the margin should not be less than 40mm) on the working platform.Lift (open) the layering strip of the packaging bag and place the sealing position of the packaging bag on the silicone strip of the sealing, and put it firmly, spread, flatten and align, leaving room at both ends.When multiple bags are packed in the same room, they should not overlap each other.Put down the packing bag layering, adjust the packing bag sealing margin to the appropriate length, and finish the manual material placement.

After normal operation, this process should be completed within a working cycle.

C press the "work" button, the equipment enters the cycle working state according to the set parameters, and the operator repeats the actions specified in clause b to carry out production.When there is no product (material) on the conveyor belt or in the working room (vacuum room), the normal shutdown operation can be carried out.

D to stop work, press the "stop" button to turn off the power switch of the equipment (the power indicator is off) and cut off the main power supply.

E "stop" button also has the function of "emergency stop". When the device is in operation state, in case of emergency stop, no matter the program operation or manual operation is in any state, the operation will be terminated immediately after each press of "stop" button until the "work" button is pressed again and the travel switch is released.

Continuous rolling automatic vacuum packaging machine adopts vacuum pump imported from Germany, with a high vacuum degree up to 0.1mpa in line with national standards.Feature 2: less lampblack during work is beneficial to food hygiene and staff health;Italian imported chain, strong clamping force, wear resistance and long service life;Schneider electric is more stable;Gb 304 stainless steel frame body vacuum chamber is 8 mm thick, support washing, corrosion resistance;Beautiful and durable, long service life;Waterproof and moisture-proof computer board even if there is no need to worry about the damage of electrical components in the workshop;Flat cover height of 90mm, high cover height of 100-120mm suitable for different heights of products;The whole machine can be adjusted 0-40 degrees even if the product contains liquid packaging.

The machine vacuum chamber is equipped with water connection port, which means it has a water circulation system -- the seal is beautiful, and the packaging bag seal does not wrinkle or wrinkle!Specific operation method: the water inlet and outlet connected to the water pipe, the water inlet to the faucet switch on a small point to place a goldfish with oxygen pump to achieve water circulation, work a day with one or two buckets of water.

Conventional sealing line spacing of 43 cm, can be customized according to the user product size of 55 cm and 65 cm studio size;Equipment with counting function, convenient to calculate output;High precision rotating position finder prevents bag deviation during transmission.

Continuous rolling vacuum packaging machine with rapid packaging, labor saving, quickly occupied the market space, gradually replace the single and double chamber vacuum packaging machine!